Publicidad
Idiomas disponibles
Idiomas disponibles
EN
LOADING AND UNLOADING PETS
Load and unload pet only through the rear door, with the front door closed and the
trailer attached to the bicycle. Put the mat inside the trailer(if needed),with the pet inside
the trailer, snap one end of the safety leash (included) to the pet's collar and the other end
to the D-ring located inside the trailer. Adjust the length of the leash so that the pet cannot exit
through the front window when it is open. Always close the rear door while riding.
JOGGER FUNCTION
1. Push Bar Assembly
(1) According to following images and steps, please put the safety tie ring into the bracket
screw, so this could avoid safety pin lost, put the screw into the frame tube mount hole and
use the open end wrench (10 mm) tight the nut on the screw. Make sure the bracket mounted
safety and tight.
(2).Release the safety pin from the bracket first. Then insert the push bar into bracket and lock
the safety pin on both sides, please make sure the safety pin locked.
Remark: push bar could mounted like position A or B.
23
Publicidad
