Descargar Imprimir esta página

Garant GRIDLINE 927062 Instrucciones De Montaje página 17

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 57
NOTICE
Wiring and pipes installed in the floor
Damage to wiring and pipes.
»
Check floor for sufficient load-bearing capacity before drilling.
»
Use suitable drill and drilling materials.
»
Use suitable protective equipment.
»
Drilling to be carried out by trained personnel.
»
Do not drill in the immediate vicinity of wiring or pipes.
5.
Recycling and disposal
Do not dispose of electrical components in domestic waste.
Comply with the national regulations for disposal. Users have an obligation to take electronic compon-
ents to a collection point.
6.
Technical data
6.1.
SOCKET
Data
Protection class
Type
Connection type
6.2.
COMPRESSED AIR COUPLING
Data
Type
Nominal width
6.3.
LOADING MATRIX
i
Loading data for GridLine Vario workbenches with worktop length 1000 – 2000 mm.
Available combinations
1 pc. worktop
2 pcs. support legs
4 pcs. stabilising plates
1 pc. worktop
2 pcs. support legs
2 pcs. individual rear panels
2 pcs. stabilising plates
1 pc. worktop
1 pc. support leg
1 pc. casing standing on the floor
2 pcs. stabilising plates
Value
IP 54
SCHUKO
Screwless clamp
Value
Safety compressed air quick-
change coupling
DN 7.8
1 pc. worktop
2 pcs. support legs
1 pc. suspended casing
2 pcs. stabilising plates
1 pc. worktop
2 pcs. support legs
1 pc. suspended casing
2 pcs. individual rear panels
1 pc. stabilising plate
Data
Number of poles
Nominal current
Nominal voltage
Data
Internal thread
Operating pressure
Distributed non-dynamic load
400 kg
600 kg
800 kg
Value
2P +E
16 A
250 V
Value
3/8 inch
Up to 16 bar
www.hoffmann-group.com
de
bg
da
en
fi
fr
it
hr
lt
nl
no
pl
pt
ro
sv
sk
sl
es
cs
hu
17

Publicidad

loading

Este manual también es adecuado para:

Gridline 927063Gridline 927067Gridline 927068