Explanation of the connections
MIC
P. CONT
L-TURN (FUTURE USE)
R-TURN (FUTURE USE)
CAMERA
CAMERA 1/4
CAMERA 2/4
CAMERA 3/4
CAMERA 4/4
CAMERA 5V
CAMERA 12V
GND
RADIO ANTENNA
BT ANTENNA
DAB ANTENNA
HDMI
GPS ANTENNA
USB
TELEPHONE MUTE
PARKING
REVERESE
SWC
ISO CONNECTOR A
ISO CONNECTOR B
External microphone connector (included in delivery content)
Switched power supply 12 Volt/ max. 200 mA for controlling external amplifiers,
active antenna
Not used, future use
Not used, future use
Reverse camera input (only for setting option AHD) (note: this camera channel will
be able to show parking lines if activated in settings)
Camera 1 input (only for setting option AHD 4), for example for rear view camera
Camera 2 input (only for setting option AHD 4), for example for reversing (note: this
camera channel will be able to show parking lines if activated in settings)
Camera 3 input (only for setting option AHD 4), for example for grey water tank outlet
Camera 4 input (only for setting option AHD 4), for example for front camera
Camera power supply 5 volts (switched power supply 5 volts, max. 1000 mA)
Camera power supply 12 volts (switched power supply 12 volts, max. 1100 mA)
Ground (camera power supply)
FM antenna (with 12 volts phantom feeding for active antenna)
Bluetooth antenna (included in delivery content, don't use any other antenna)
DAB antenna (with 12 volts phantom feeding for active antenna)
HDMI input
GPS antenna (included in delivery content)
USB input (3x)
Mute input (mass activated)
Parking signal (handbrake, mass activated)
Reverse signal (12 volt activated)
Steering wheel connector for resistive/ voltage controlled steering wheel controls
Power supply, details see connection diagram
Speaker connection, details see connection diagram
Diagrama de conexión
123