Publicidad
Idiomas disponibles
Idiomas disponibles
Care & Maintenance
EN
Tips:
• Turn off the appliance before maintenance. Do not touch the power switch.
• Replace parts if needed. The parts must be replaced by those available from the
manufacturer or its service agent.
• If the vacuum is not used for an extended period, fully charge it, unplug the power plug,
and store the vacuum in a cool, low-humidity environment away from direct sunlight. To
avoid over-discharge of the battery, charge the vacuum at least once every 3 months.
Cleaning the Used Water Tank and the Filter
1. Press the Used Water Tank release
button, and pull the Used Water Tank
outwards to remove it.
2
1
3. Rinse the Used Water Tank and the tank
cover with water, and clean the inner wall
of the tank with the provided cleaning
brush.
Note:
• If the filter is dirty, rinse it with clean water and dry it completely before use.
• Replacing the filter every 3 to 6 months is recommended.
11
11
2. Take out the filter from the Used Water
Tank cover. Pull up the tank cover and
pour out the waste water.
Filter
Used Water
Tank Cover
4. Re-install the filter and the Used Water
Tank cover. Then re-install the Used Water
Tank until you hear a click.
Click
2
1
Care & Maintenance
Cleaning the Solid Waste Filter Basket
Remove the Used Water Tank and then pull up the tank cover. Separate the solid waste
filter basket from the tank cover and clean it.
Note: If you do not need to use the solid waste filter basket, you can remove it.
Cleaning the Brush Assembly
1. First, press the brush roller cover
release buttons inwards on both sides
to remove the brush roller cover. Press
the brush roller release button, and the
brush roller handle will pop out. Pull it to
take out the brush roller.
1
2
2. Clear any hair and debris caught
on the brush roller with the provided
cleaning brush. Rinse the brush roller
with clean water and dry it completely.
1
2
EN
12
12
Publicidad
