Publicidad
Idiomas disponibles
Idiomas disponibles
Note.
If the coffee flow in your espresso machine is very slow, the coffee
grinding is too fine, if it's quick, the coffee grinding is too coarse. Many factors in-
fluence the coffee flow such as: the amount of coffee, its pressing, the espresso
machine adjustments, how clean the filters are and also the climatic conditions.
H
Adjust the doses
Note.
The grinder is fitted with the LCC (LELIT Control Center), which
allows to program the grinding time for both doses.
Note.
The factory pre-set parameters are 3,0 seconds for 1 dose and 5,5
seconds for 2 doses. The grinding time can vary from 2 seconds to 20 seconds.
H.1 To enter in the programming mode and change the grinding time for 1 dose,
press once the "-" button, the display shows the icon and the time (3,0") for 1
dose.
H.2 To enter in the programming mode and change the grinding time for 2 doses,
press twice the "-" button, the display shows the icon and the time (5,5") for 2
doses.
H.3 Press the "+" button to access, and then press the "-" or "+" button to de-
crease or increase the grinding time.
H.4 Three seconds after the last impulse of a button, LCC stores the data and
exits from settings mode.
I
Reset the parameters
I.1 To reset the electronic card, turn the grinder off. Once off, keep the "+" button
of the LCC pressed, and then turn on the grinder by pressing the switch (5), the
"Preset done" message will appear on the LCC display to confirm that the reset
has been completed. Turn off and turn on the grinder by pressing the switch (5).
J
Energy saving
J.1 When the grinder has not been used for 30 minutes, it enters the standby
mode: the LCC display turns off and the led light (6) blinks every 3 seconds.
J2. To turn it back on, press the button (7) (PUSH) or the button (4) (adding cof-
fee).
Note.
To disable the standby function, turn the grinder off, by pressing
the switch (5). Keep the button (4) (adding coffee) pressed and turn the grinder
back on by pressing the switch (5), the led light (6) will remain off. Turn off and
English
EN
13
Publicidad
