Publicidad
Idiomas disponibles
Idiomas disponibles
Swing assembly
Note!
Only fasten the swing to equipment for which you can guarantee adequate
strength with absolute confidence. To prevent unintentional detachment use
10mm strength screw hooks minimum for assembly, which are bent by at
least 540° or which are completely closed. In wooden beams, the fastening
hooks must be completely inserted through the wood and fixed by a locknut
from above to accomplish an adequately secure connection.
Different fastening hooks
Only fasten the swing unit to an appropriate retention system.
These are:
No. 1: a closed retaining grommet, which is secured to the swing element by
a carabiner (Fig. A).
No. 2: a circular hook, which is bent by at least 540° to prevent
unintentional detachment (Fig. B).
A
B
(1)
(1)
Note!
The eye of the retaining grommet (1) must be attached at a
right angle to the direction of the swing so that the fastening
element of the swing is not damaged too much during use.
14
GB/IE
Publicidad
