Publicidad
Idiomas disponibles
Idiomas disponibles
Programming your remote
Your remote is designed to control multiple audio/
video devices. To use, you will need to program the
remote for your devices. There are two different
methods you can use to program the remote,
Direct Code Entry or Auto Code Search.
• The Direct Code Entry method is the
recommended method, as it is the simplest
and quickest method in most cases.
• The Auto Code Search method searches
through all the codes in the remote to find a
code for your device.
NOTE: This remote comes preprogrammed for
Roku
Samsung TVs and STR for Roku boxes.
Direct Code Entry (recommended)
SETUP
SRP4229B_07 ENG Manual v2.indd 6
SRP4229B_07 ENG Manual v2.indd 6
boxes and Samsung TVs. Press TV for
®
Locate the Code List included with
1.
your remote. Find the section for the
type of device you wish to control,
(e.g., TV, STR, DVD, AUD). Locate the
brand of your device and circle all the
remote codes for the brand.
2. Press and hold down the SETUP
button on the remote until the red
light on the remote control turns on.
Release the SETUP button. The red
light will remain on.
NOTE: The red light will either be a
small light at the top of the remote or
the power ON/OFF button.
3. Press and release the device button
on the remote for the type of device
you wish to control, (e.g., TV, STR,
DVD, AUD). The red light will blink
once and remain on.
NOTE: Any of the device buttons on the
remote can be programmed to control
any of your devices. For example, you
can use the AUX device button on the
remote to control a satellite receiver,
digital converter box, streaming media
player or any device category in the
Code List.
6
9/2/21 5:03 PM
9/2/21 5:03 PM
Publicidad
