Publicidad
Idiomas disponibles
Idiomas disponibles
ww_.GEAppliances.com
Slide-Out Spillproof Sheff (onsome models)
Frontbar
The slide-out spillproof shelf allows you
to reach items stored behind others. The
special edges are designed to help prevent
spills fronl dripping to lower shelves.
NOTE:Theshelves are shippedwith tapeon
theback. Remove this tapebeforeattempting
toremovetheshelf.
Toremove:
O
Remove all items from shelf.
Slide the shelf out until it stops.
Lift the front edge of the shelf until the
tabs are above the shelf fi'ame.
Continue pulling the shelf fbrward until
it can be lifted out and removed.
Toreplace:
_
Place the rear of the shelf on the shelf"
fi'amejust behind the fi'ont bar.
_
Slide the shelf back until the tabs are
above the openings.
Lower the shelf so that the tabs go into
the openings; then slide the shelf all the
way in.
Makesurethat theshelfsitsflat after reinstallation
anddoesn "tmovefreelyfromsidetoside.
Makesureyoupushtheshelves all the wayin
beforeyouclosethedoor
Adjustable Bins on the Door (onsome models)
Adjustable bins can easily be carried from
refrigerator
to work area.
TOremove:Lift bin straight
tip; then pull out.
TOreplace orrelocate:Engage
the bin in the
molded
supports
of the door and push
down. Bin will lock in place.
The snugger (on some models) helps prevent
tipping,
spilling or sliding of small items
stored
on the door shelf
Grip the finger
hold near the rear of the snugger
and move
it to fit your needs.
NOTE: Binsfor the refrigeratorandfreezer
doors are differentsizesandare not
interchangeable.
Non-Adjustable Shelves on the Door
Detachable
shelves deepen
and enclose
fixed door shelves,
providing
more
storage
room and greater
storage
flexibility.
TOremove:Lift the shelf st_'aight tip; then
pull out.
TO replace:Engage the shelf extender in
the molded supports on the door and push
down. ft will lock in place.
Freezer Tilt-Out Bin (onsome models)
Push the button as you tilt out the bin.
TO remove: Hold the sides of the bin and
lift it straight up; then pull out.
TO replace: Engage the ends of the bin
in the molded supports on the door and
push down. ft will lock in place.
NOTE:Do not overloadthe bin.
Publicidad
