Chal-tec Ogge Electric Sliding Co-Sleeper Instrucciones De Montaje página 23

5. Using your hand, pull down the stoppers seen in the images above.
6. Connect the bed straps provided around the base of your bed and connect them to the base of
the crib.
WARNING
Always ensure there is no more than a 2-cm gap between your mattress and the side of the crib.
Fixing to adult bed for bedside sleeper mode
With the crib rail in the lower position, place
the crib close to the bed. Check the height
of the sleeper against the height of the bed.
The height of the open side edge of the crib
should always be aligned with or lower than
the height of the bed mattress.
To fix the sleeper securely to bed, pull the
anchor straps from under the bedside sleeper
and slide under and over the bed base.
Lock the buckles under the bedside sleeper
and tighten the straps until the sleeper is firmly
attached.
EN
23