Publicidad
Idiomas disponibles
Idiomas disponibles
Quick guide
CLEANING AND
MAINTENANCE
THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.
In order to receive a more complete assistance,
THANK YOU FOR BUYING OUR PRODUCT.
WARNING: unplug the dryer during the cleaning and
please register your product on
maintenance procedures.
www.whirlpool.eu/register
Emptying the water tank after each cycle (see Fig. A).
PLEASE SCAN THE QR CODE ON YOUR APPLIANCE IN ORDER TO REACH MORE INFORMATION.
Pull the container out of the dryer and empty it into a sink or
other suitable drain, then place it back properly. Do not use the
dryer without having inserted the container back in place.
Cleaning the primary door filter after each cycle (see Fig. B).
Pull the primary door filter out and clean it by removing the lint from
the filter surface under running water or using a vacuum cleaner.
Cleaning the secondary door filter when the relevant
indicator turns on (see Fig. C).
Pull the secondary door filter out and clean it in all its parts by
washing it under running water or using a vacuum cleaner.
Clogged filters - clean both door filters (see Fig. B, Fig. C).
For optimal performance, dry the filters before inserting them
back in place.
Do not use the dryer without having inserted all filters back
in place properly first.
The filters are essential parts for drying. They are intended
to collect the lint formed during the drying process. In case
of clogged filters, the air flow inside the dryer would be
seriously affected: the drying time would be longer, the
energy consumption would increase and the dryer could be
damaged. If these procedures are not carried out properly,
the dryer may not start.
NOTE: After cleaning the filters the relevant indicator remains on;
this is normal, it will disappear when you start a new drying cycle.
Autoclean
The maintenance of the bottom filter of this model is
automatic. The dryer carries out cleaning when the sensors signal
the need to do so. In this case, the machine goes on working even
when the drying cycle is completed. An indicator on the control
panel will signal the maintenance. Do not switch the machine off
during this phase.
Cleaning the tumble dryer
• The external metal, plastic and rubber parts can be cleaned
with a damp cloth.
• Clean the front air intake grille regularly (every 6 months) with
a vacuum cleaner to remove any lint, fluff or dust deposits.
Furthermore, remove any lint deposits from the filters area,
using a vacuum cleaner every so often.
• Do not use solvents or abrasives.
PRODUCT DESCRIPTION
Water Tank (A)
1.
Air Intake grille
2.
Door filter: primary (B), secondary (C)
3.
1
Policies, standard documentation, ordering of spare parts and additional product information can be found by:
Policies, standard documentation, ordering of spare parts and additional product information can be found by:
• Using QR code in your appliance
• Using QR code in your appliance
www . privileg. de
• Visiting our website docs.whirlpool.eu and parts-selfservice.whirlpool.com
• Visiting our website
• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When contacting our After-sales
• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When contacting our After-sales
Service, please state the codes provided on your product's identifi cation plate.
Service, please state the codes provided on your product's identifi cation plate.
and parts-selfservice.whirlpool.com
B
3
2
C
TRANSPORT AND HANDLING
Before using the appliance carefully
Before using the appliance carefully
Never lift the dryer by holding on to its top side.
read the Safety Instruction.
read the Safety Instruction.
1. Unplug the dryer
2. Remove the water from the water tank completely.
3. Make sure that door and water tank are properly closed.
Power consumption
off-mode (Po) - Watts
left-on mode (Pl) - Watts
Programs
Eco Cotton *
Eco Cotton
Synthetics
*This is the reference programme for the energy label and suitable to
dry normal wet cotton laundry. This is the most efficient programme
in terms of energy consumption for drying wet cotton laundry.
(Standard/Default starting configuration).
Heat Pump System
The heat pump contains fluorinated greenhouse gases,
contained in a hermetically sealed unit. This sealed unit contains
0.41 kg of the gas R134a. GWP = 1430 (1 t CO2).
Step 1
A
Step 1
B
C
C
0.33
2.00
kg
kWh
Minutes
9
1.64
210
4.5
0.86
120
4
0.50
78
Step 2
Step 3
Step 2
Step 3
B
B
C
C
EN
Publicidad
