Publicidad
Idiomas disponibles
Idiomas disponibles
EN - Safety Precautions
•
Follow all instructions for safe use and handling of the product.
•
Use the camera within given temperature, humidity and voltage levels noted in the camera specifications.
•
Do not disassemble the camera.
•
Do not point the camera directly at the sun or a source of intense light.
•
You may need to clean periodically using a damp cloth. Do not use harsh, chemical-based cleaners.
•
The supplied cable is rated for surface mounting only (Non-UL). Cables for in-wall and floor-to-floor installations
are sold separately (CMR type). These and other cables are available at lorex.com.
•
It is recommended to connect the camera to the NVR or an external PoE switch. If using a power adapter with this
camera, a REGULATED power supply is REQUIRED (not included). Use of a non-regulated, non-conforming power
supply can damage this product and voids the warranty.
Disclaimers
•
Use the camera only with compatible Lorex recorders. For a full list, visit lorex.com/compatibility.
•
Not intended for submersion in water. Installation in a sheltered location recommended.
•
The camera includes an Auto Mechanical IR Cut Filter. When the camera changes between Day/Night viewing
modes, an audible clicking noise may be heard from the camera. This clicking is normal, and indicates that the
camera filter is working.
•
Audio recording and/or face recording without consent is illegal in certain jurisdictions. Lorex Corporation
assumes no liability for use of its products that do not conform with local laws.
Publicidad
