Publicidad
Idiomas disponibles
Idiomas disponibles
•
Watch out for obstacles – risk of trip-
ping!
•
Take timely breaks from work to pre-
vent fatigue and exhaustion – risk of
accidents!
•
Only work in good light and visibility
conditions.
•
Work carefully, do not endanger
others.
•
Do not work on a ladder, do not work
on unstable sites.
•
Do not work near power lines!
Danger to life from electrical shock!
•
Wear proper clothing and equipment
when using, filling and cleaning the
device.
•
To reduce the risk of eye injuries, wear
close-fitting safety goggles according
to standard EN 166. Ensure that the
safety goggles fit correctly.
•
Work clothes must fit tightly and must
not hinder you.
9) RESIDUAL RISKS
Even if properly operating and handling this
electric tool, some residual risks will remain.
Due to its construction and build, this electric
tool may present the following hazards:
a. Lung damage if a suitable protective
mask is not worn.
b. Contact with hazardous substances.
Spray materials can be harmful if they
are inhaled, swallowed or come into
contact with skin or eyes. Follow the in-
structions and wear suitable protective
equipment.
Observe the safety informati-
on and notes on charging
and proper use as shown in the in-
struction manual for your battery
and charger from the Parkside
X 20 V TEAm or X 12 V TEAm series.
A detailed description of the char-
ging process and further informa-
tion can be found in the separate
operating instructions.
Preparation
Warning!
Switch off the device and re-
move the battery before any
assembly work.
Assembling the spray lance
1. Insert the connection piece of the
hose (4) into the pistol grip (1)
as far as it will go and fix it with
the clamping nut (13).
2. Insert the spray lance (7) into
the connecting piece (23) of the
metal pipe (3) and screw it tight
with the clamping nut (22).
Attention! Be sure to check the hose
connections.
Any leaks must be repaired immedi-
ately. The device is no longer to be
used until then.
The spray lance can be inserted
into the holder (6) for transport or
when not in use.
GB
IE
29
Publicidad
