Publicidad
Idiomas disponibles
Idiomas disponibles
26
OPERATION
Signal
The washing machine plays a melody when the
wash cycle is finished. The buttons make a sound
each time a button is pressed. Use this option to
adjust the volume of the melody and button tones.
A
1
Press
.
B
2
Turn
to the desired cycle.
3
Press
. Adjust the melody and button tones
as desired.
4
Press the desired option to use the other options.
C
5
Press
.
Prewash
Prewash for 15 minutes when clothes are covered in
dirt or dust. This feature is suitable for heavily soiled
items.
B
A
1
Press
and turn
2
Press
.
-
light will turn on.
3
Press the desired option to use the other options.
- Skip to step 4 to use the default setting without
changing the options.
C
4
Press
.
Rinse+Spin
Use this cycle to rinse detergent from load.
B
A
1
Press
and turn
2
Press
.
3
Press the desired option to use the other options.
- Skip to step 4 to use the default setting without
changing the options.
C
4
Press
.
to the desired cycle.
to the desired cycle.
Drum Light
The drum is equipped with a white LED light that
illuminates when the washer is turned on. This light
automatically turns off when the door is closed and
the cycle starts. To turn on the light during a cycle.
B
A
1
Press
and turn
C
2
Press
.
3
Press and hold
wash cycle.
- The drum light will illuminate and then turn off
automatically after 4 minutes.
- Clothes and the gasket may look like yellow due
to lights of the lamp, but it is normal.
Fresh Care
Use this function when you are not able to take out
your clothes as soon as the wash cycle ends.
This function provides periodic tumbling for up to
about 19 hours to prevent wrinkles. Press the Start/
Pause or Power button to unload laundry at any
time.
B
A
1
Press
and turn
2
Press and hold
wash cycle.
-
light will turn on.
3
Select any desired options.
- Skip to step 4 if you would like to use the
default settings without changing or adding any
options.
C
4
Press
.
Extra Rinse
You can add an extra rinse cycle to the default rinse
cycle.
B
A
1
Press
and turn
2
Press
.
-
light will turn on.
3
Press the desired option to use the other options.
- Skip to step 4 to use the default setting without
changing the options.
C
4
Press
.
to the desired cycle.
for 3 seconds during the
to the desired cycle.
for 3 seconds during the
to the desired cycle.
Publicidad
