Requirement for positions
Horizontal adjustment:
• The slant angle should be less than 1 degree.
Power outlet
• Leave a sufficient safety distance between the washing
machine and the wall (distance between the back/left/right
of the washing machine and a wall >2cm).
• The distance between any side of washer and power outlet
should be within 1.5 meters.
• Don't use too many electrical appliances in one outlet.
Environment cleaning
•
It's necessary to clean the wall, door and ground.
•
Install the washer on a hard and steady ground with floor drain rather than soft blanket
or wooden floor.
•
Don't put dirty clothes or some other goods on a washer's head cover, otherwise it may
impact the normal operation.
Notice
Power connection
1. Don't use the wiring board or something like that.
2. If the power lines are damaged, please contact professionals to repair.
3. After the use of washer, pull the plug and turn the tap off.
4. Connect the washer with grounded outlet to correspond to the wiring principles.
5. Place the washer in which is easy to connect the outlet.
•
Contact the maintenance center and ask professionals to repair the washer.
Laypeople may cause damages and troubles on the washer.
•
Don't put the washer in the place where the temperature is below zero. The pipes
will be frozen and break. Moreover, the temperature below zero will damage the
programming controller.
•
If move the washer in an environment whose temperature is below zero, please keep
the washer at room temperature for a few hours before starting it.
Grounding introduction
•
A washer must have the grounding devices. If a trouble happens, the device can
reduce the risk of electrical shock. The device is equipped with a cable (including a
wire and a grounded plug). The grounded plug must be inserted in an appropriate
outlet. If you want to know if the washer is grounded correctly, please contact with
professional maintenance staff. If the plug can't match with the outlet, please don't
change the plug by yourself.
69