Publicidad
Idiomas disponibles
Idiomas disponibles
Using the Trigger Lock-on Button
(Fig. 6)
The Trigger Lock-on Button 3 feature may be used
to keep the blower in the on position, without
having to continuously hold in the Air Speed Trig-
ger 1, to reduce fatigue in prolonged use . To save
energy, switch the blower off when not in use .
Air speed can be changed while the blower is
locked on .
Hold in the Air Speed Trigger 1 to start the blow-
er, turn the Air Speed Control Wheel 2 to the de-
sired setting, then press in the Trigger Lock-on
Button 3 to lock the blower to the on position .
The air speed may be adjusted while it's in the
locked position .
Press in the Air Speed Trigger 1 to release the
Trigger Lock-on Button 3 .
If the blower vibrates excessively, check the ma-
chine thoroughly for damage .
Hanging the Blower
(Fig. 7)
The Hanger Slot 8 may be used to hang the
blower onto hardware that is suitable for the
blower's weight . See Specifications section for
tool weight . Do not store or hang blower with
battery pack inserted .
Always remove the battery pack before transporting. Carry the tool by the
handle .
9016750001 GBL18V-450 202311.indd 13
page heading
Operation
Fig. 6
3
Fig. 7
8
Transportation
2
1
13
11/27/23 8:27 AM
Publicidad
