Descargar Imprimir esta página

Primer DS-11 Manual De Uso Y Mantenimiento página 100

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 18
4.4.
Key associated functions
When the different buttons are pressed, the functions described modify the machine
conditions.
Button
Machine status
Select
Programme selection
Temperature selection
Time selection
Programme selection
While operating.
Temperature selection
While operating.
Time selection
In case of alarm
Arrows
Programme selection
Temperature selection
Time selection
Start/Stop
Programme selection
Time selection
Temperature selection
Operating
Prog.
Machine stopped
4.5.
Information displayed
The display offers different types of information, including the programme number, the time
remaining and the temperature setting. The information may vary according to the state of
the machine at any moment.
When the machine is operating, the clock symbol flashes.
When the heating is ON, an arrow pointing upwards appears next to the thermometer.
The following table shows all the possible information displays and the conditions in which
they are displayed.
Display
Machine status
MP
In the ignition (2s)
END
End / Anti-crease
AL-X
Alarm
(2) The End / Anti-crease cycle lasts a maximum of 99 minutes. During this period, an alarm
will sound every three minutes, reminding you that the cycle has finished. After 99 minutes
the machine returns to the status: Pause.
.
98
All manuals and user guides at all-guides.com
Display
P01
Switches to temperature selection
60º
Switches to time selection
Switches to programme selection
25'
P01
Switches to temperature selection
60º
Switches to time selection
Switches to programme selection
25'
AL-3
Reset alarm
P01
Increase / Decrease Programme Number
60º
Increase / Decrease temperature
Increase / Decrease time
25'
P01
Start the cycle with the last selected parameters
Start the cycle with the last selected parameters
25'
60º
Start the cycle with the last selected parameters
Stop and reset selected programme
Enters programming mode
Comments
Shows software version
End of cycle / anti-crease cycle
Displays one of the alarms, see section 5
Action
(2)

Publicidad

loading

Este manual también es adecuado para:

Ds-17Ds-23Ds-28dDs-35dDl-11Dl-17 ... Mostrar todo