STEP 16
12
(x4)
7
4
8
12.4
13
69
16
177.4
ameriwoodhome.com
16
40.6
16
40.6
Assembled unit MUST be square on the height, width, and
depth to function properly.
Assembled unit MUST be placed flat against the wall.
Assembled unit MUST be screwed into wall studs at the
top and bottom for safety.
You need to locate at least 1 stud, but 2 is better.
Drill two 5mm holes at each of the vertical locations
shown that land on a stud. Attach unit to wall studs using
four screws (12).
Note: Wall studs are typical 16" apart.
DO NOT use wall anchors to fasten your unit to the wall.
Use stud finder where intended.
27
stud
wallboard