LIVARNO home 373579 2104 Instrucciones De Montaje página 9

4x Leg large table G
4x Leg small table H
8x Threaded screw 6 x 30 mm I
8x Threaded screw 6 x 12 mm J
8x Screw 4 x 10 mm K
8x Adhesive feet L
1x Hexagon socket 4 mm M
1x Assembly instructions (not illustrated)
4. Technical specifications
Type: Nesting side tables
IAN: 373579_2104
Tradix Item No.: 373579-21-A
Measurements:
- Large table: approx. 40 x 40 x 40 cm (W x D x H)
- Small table: approx. 35 x 35 x 35 cm (W x D x H)
Maximum load:
- Large table: approx. 7 kg
- Small table: approx. 5 kg
Total weight: 4.5 kg
Material: wood, metal
Production date: 08/2021
Warranty: 3 years
5. Safety information
WARNING!
!
Risk of injury and suffocation!
If children play with the product
or the packaging, they may injure
themselves or suffocate!
- Do not let children play with the product or the
packaging.
- Supervise children who are close to the product.
WARNING!
!
Risk of injury!
A defective product is not allowed to be
used! There is a risk of injury!
- Do not use the product in the case of malfunc-
tions, damage or defects.
- Significant danger can occur for the user in the
case of improper repairs.
6. Assembly
1. Remove all packaging materials.
2. Check whether all parts are available and un-
damaged.
If this is not the case, notify the specified service
address.
For assembly, you will need a Phillips screwdriver
(not included in the scope of supply) and a hexagon
socket M (included in the scope of supply).
Assemble the product as shown in Fig. B to Fig.
-
D.
- Place a soft pad under the furniture during as-
sembly. You can use the outer packaging for this
purpose if necessary.
CAUTION!
!
Risk of injury!
There is a risk of injury from tumbling or
falling.
- The product is not a climbing aid.
- Never stand or sit
on the product.
CAUTION!
!
Danger of material damage!
The product is not allowed to be
overloaded.
max.
kg
- Only put weight on the product up to the
maximum indicated weight, see Fig. E.
- Only load the product in the middle.
- Do not load the product on the edge, it
can tip over.
- Avoid pushing the product across the
floor. The floor could become scratched.
- The adhesive feet L can cause pressure points
on sensitive floors. Check whether your floor is
suitable.
7. Maintenance
- Check all screw and plug connections at regular
intervals and retighten them if necessary.
- Loose screw connections lead to an impairment
of safety.
8. Cleaning and care instructions
7.
NOTE!
Danger of material damage!
- only clean with a damp cloth
- only use a a mild detergent
- do not use any strong detergents and/or chemi-
cals
- do not use sharp-edged tools such as spatulas or
similar, they can damage the surface
GB/IE
9