· Plug in the power adapter.
· When charging, the LED light on the
Unit will turn RED.
· Once the Unit is completely charged
the RED LED light will turn OFF.
· Remove Charging Cable from power
adapter and Unit.
· NOTE: The Unit will not operate while
charging.
How to Use
Prior to first use, test unit on small area,
if sensitivity or allergic reactions occur,
discontinue use immediately.
Always use on clean, dry feet. Do not
use on wet feet, if, at any time, you feel
pain or discomfort, discontinue use
immediately.
It is suggested to use your product
either over a garbage or towel as there
may be some dead skin or residue
from use.
· Choose either the Coarse or Fine
Roller Head.
· The Unit comes with the Coarse Roller
Head already attached.
· Be sure the Roller Head is firmly placed
into the Unit before use.
· Slide the switch up one time to the LO
position to turn ON the Unit.
· The LED light will turn white and the
unit will begin on Low Speed.
Choosing the Correct Speed:
· The product comes with two speeds:
· Low Speed
· High Speed
Always start on LOW speed. After beco-
ming comfortable with the Unit, you can
advance to the HIGH speed.
· Speed is determined by each indivi-
duals needs and skin type.
· Start by holding the Roller Head gently
against your skin.