Publicidad
Idiomas disponibles
Idiomas disponibles
NOTE: If the roller heads are nicked,
worn or broken they could cause injury
and should be replaced. Roller heads
last through several sessions depending
on frequency of use and size of area
Replace roller heads as needed.
Each roller head, has two ends:
· Post A: The fixed gray, square post.
· Post B: The movable white, round post
that presses inward.
· Slide the Roller Head into position until
the Roller Head clicks into place.
· Be sure the Roller Head is firmly in the
place before turning ON the unit.
Care and maintenance
The roller heads MUST be removed be-
fore cleaning. Do not use product under
water. Never clean the unit/handle using
liquids such as alcohol, acetone or nail
polish remover.
Cleaning the roller heads:
· Do not submerge roller head in water.
· For cleaning purposes, only the roller
heads are water resistant
· When rinsing the Roller Heads in water,
be sure the movable white, round post
is facing down and away from the
running water.
· Let the roller head(s) air dry completely
and store in a dry, safe place.
Cleaning the unit:
· Clean the unit after each use.
· Clean the handle with a damp cloth to
remove any residue.
· Wipe the unit/handle with a dry cloth.
· When done cleaning and drying, refer
to the removing/replacing roller heads
section to reassemble.
· Be sure to store the Unit in a dry, safe
Publicidad
