Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING
Never perform any type of maintenance/service until the string trimmer is
completely stopped.
ADJUSTING SPINDLE HEIGHT
1. Turn the spindle housing until the adjusting nut is exposed.
2. Loosen the adjusting nut by wrench.
3. Slide the housing upward or downward to a desired spindle height.
4. Retighten the adjusting nut.
WWW.SENIXTOOLS.COM
(Figure.6)
Figure 6
MAINTENANCE
TENSIONING THE ADJUSTMENT ROPE
The spindle is driven by the engine control lever which is connected by the
adjustment cable. The rotating speed varys from the different tension of the
adjustment cable. A loose adjustment cable will result in lower cutting efficiency.
1. Tighten the adjustment cable using the column nut.
2. Leave a two-finger space between the engine contol lever and the upper handle.
3. Lock the small nut.
(Figure.7)
1
3
Figure 7
2
EN - 13
Publicidad
