Zycoo SH10 Guía De Instalación Rápida página 6

Web Login
1
Connect network cable and power supply (if PoE is not enabled on the network cable).
2
After the device is started, the IP address will be automatically broadcast by default. After
the device parameters are configured, it will be automatically canceled. You can configure
whether to broadcast after startup through the WEB interface. Factory default DHCP, if no
IP address is obtained, the default login IP address is 192.168.1.101. Simply enter the IP
address in the browser address bar to enter the device login interface. The default
username and password of the device are both admin.
Interfaces and Instructions
1
2
3
4
Ethernet
1
Dry Contact（A-N.O. ; B-COM）
4
3
2
Power
Schematic diagram of wiring harness
3
Switch Quantity Input