LOTRONIC MIC-PRO-HF Manual De Uso página 3

EXPLANATION OF SIGNS
In accordance with the requirements of UK standards
The product is for indoor use only
This marking indicates that this product should not be disposed with other household wastes throughout the EU.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return your used device, please use the
return and collection systems or contact the retailer where the product was purchased. They can take this product for
environmentally safe recycling.
FEATURES
•
Wireless microphone with receiver that connects to any sound system fitted with a mini or 6.35mm jack socket to
give you total freedom of movement while transmitting clear and rich sound. It offers 2 UHF channels allowing to
pair a second microphone (ROADY-FL-MIC).
•
Display with frequency and battery status
•
LED indicator which lights up steadily or only to the sound of your voice
•
Possibility to change frequency in case of interference
•
Rechargeable via USB
•
Supplied with USB charger lead
•
Fully compatible with ROADY-FL-MIC
CHARGING THE UHF MICROPHONE
The mic comes with a USB charging cord. Plug this cord into the USB-C connector located under the microphone and
the other USB connector into a suitable power adapter or any other USB connector delivering an output voltage of
5Vdc. It takes 3-4 hours to fully charge the battery.
UHF MICROPHONE
1. Microphone element
2. Light ring : 2 operating modes: Steady on or flashing when somebody talks into the microphone
3. LED display: shows the operating frequency and state
4. Turn On/Off: Long press to tun on/off, short press to change the light mode
5. Pairing button: See Pairing Procedure below to pair the microphone with the receiver.
Short press this button to change frequency.
6. Transmitting antenna: Do not cover the antenna during operation otherwise the transmission distance will be
reduced.
7. USB-C connector to charge the built-in battery via the supplied USB lead
RECEIVER
8. Battery indicator: the LEDs light up to show the charge status of the built-in battery
9. Power on/off
10. Microphone 2 connection indicator (lights up when the included mic is paired)
11. Microphone 1 connection indicator (lights up when a second UHF mic (ROADY-FL-MIC) is paired with the receiver)
12. Battery indicator, red light on when charging, red light off when fully charged
13. Charging port, use DC 5V power supply
PAIRING THE MICROPHONE WITH THE RECEIVER
If microphone and receiver are not paired yet, please follow the steps below to pair them. Once the pairing has been
done, they will always connect automatically.
Step 1: Turn on the receiver FIRST.
Step 2: Only then turn on the microphone.
Step 3: Insert a sharp object into the hole (5) below the display of the microphone. PRESS AND HOLD this button until
the display begins to flash.
Step 4: Wait for 5 seconds.
MANUAL - 17-2062
UHF MIC WITH RECEIVER
3