FITFIU FITNESS MC-140 Manual De Usuario página 16

Two Manual Incline Adjustment
Fold the left and right incline
metal counterclockwise.
Adjust the central adjustment
pad until it touches the floor.
If there is a gap between the
rear adjustment pad and the
floor, first adjust the rear pad
to contact the floor.
Aligning the Treadmill with the Floor
If there is a gap between the machine's base and the floor (or if adjusting in two stages), first adjust the pad at the rear
of the base so that the front and rear contact the floor.
Then, adjust the central pad until it also contacts the floor.
Note: Adjusting the space between the pad and the floor can cause the machine and console to move.
04
If you are only using the running or walking function,
after completing the above steps, you can use the
equipment normally; If you want to use the office
function, take out the desktop and cover it on the
armrest. After inserting the locking pins and hooks
on the desktop into the corresponding positions on
the armrest, the desktop is in normal use.
The desktop latch and hook are inserted into the
corresponding positions as shown in the picture)
Incline Adjustment
The safety key is a red device found in the bag
with the manual. Place the magnet end on the
yellow label.
Important! When the treadmill is in operation,
pull the safety key to stop it in an emergency.
16
Adjustable foot
support
Pin
Hook
EN - MC-140
Adjustable foot
support
Press and hold this
button to place
the locking pin and
hook in place, then
release it.