Maytag UMC5200BAW Guía De Uso Y Cuidado página 10

Operating Instructions
CUSTOM PROGRAM
CUSTOM PROGRAM lets you recall
one cooking instruction previously
placed in memory and begin cooking
automatically.
Example: Memory to cook for 2
minutes at 70% power.
1. Touch CUSTOM
PROGRAM pad.
COOKING AT HIGH
POWER LEVELS
Example: To cook food for 8 minutes
30 seconds at 100% power.
1. Enter the cook
time.
2. Touch ENTER/
START pad.
2. Enter the cook
time.
When the cook time is over, you will
hear four beeps and END will display.
3. Touch POWER
L<'w::' LEVEL pad.
4. Enter the power
level.
"/
E7 5. Touch ENTER/
_ !_/_ _ START pad.
Example: To recall the custom
program.
Cuso_ 1. Touch CUSTOM
PROGRAM pad.
_:_,_ _-1-[ _{_
_;_ , .... 2. Touch ENTER/
_;i_ START pad.
When the cook time is over, you will
hear four beeps and END will display.
MORE/LESS
By using the MORE(9) or LESS(l)
pad, al of the pre-programmed
cook and time cook features can be
adjusted to cook food for a longer or
shorter time.
1. Touching MORE(9)
pad will add 10
seconds of cooking
time each time you
touch it.
2. Touching LESS(l)
pad will subtract 10
seconds of cooking
time each time you
touch it.
Note:
If the oven is set to cook for
more than 25 minutes, it will
automaticaly adjust itself to 70
percent power after 25 minutes to
avoid overcooking.
COOKING AT LOWER
POWER LEVELS
HIGH power cooking does not always
give you the best results with foods
that need slower cooking, such as
roasts, baked goods, or custards. Your
oven has 9 power settings in addition
to HIGH.
Example: To cook food for 7
minutes 30 seconds at 70% power.
1. Enter the cook
time.
Po'v'¢or 2. Touch POWER
Levo LEVEL pad.
3. Enter the power
level.
4. Touch ENTER/
START pad.
When the cook time is over, you will
hear four beeps and END will display.
See cooking guide for Power levels,
page 11.
COOKING WITH
MORE THAN ONE
COOK CYCLE
For best results, some recipes call for
one Power Level for a certain length
of time, and another Power Level for
another length of time.Your oven can
be set to change from one to another
automatically, for up to three cycles if
the first cycle is defrost.
Example: To cook food for 3
minutes at 100% power and then
70% power for 7 minutes 30
seconds.
1. Enter the first
cook time.
! _!!,!;
2. Touch POWER
LEVEL pad.
3. Enter the power
level.
4. Enter the
second cook
time.
_o'¢s_:' 5. Touch POWER
Leyc! LEVEL pad.
6. Enter the power
level.
C_ _ "¢ 7. Touch ENTER/
_ START pad.
When the cook time is over, you will
hear four beeps and END will display.
10