babymoov A003103 Instrucciones De Uso página 11

Thank you for choosing our Turbo Steam electric sterilizer; we recommend you read these instructions
EN
carefully before using. We also suggest you keep the instructions for reference.
By sterilizing your baby's bottles, you will minimize the risk of harmful bacteria developing.
• Sterilizes the core of the bottles thanks to its exclusive system:
arms fitted with steam nozzles.
• Sterilizes inside and outside the bottles.
• Sanitizes up to 6 bottles with their accessories at a time.
• 2 in 1: sterilizer and bottle draining rack.
• Removable arms to sterilize other accessories including the
breast pumps.
a. Lid's handle
b. Lid
c. Drip tray
d. Central trunk
e. Steam branches
- Place the tree assembly on the drip tray (c).
- Wash your bottles carefully.
- Put the bottles and accessories on the branches of the tree assembly.
- The remaining water will flow on the white base and be collected by the drip tray.
1. Remove the drip tray (c) under the appliance.
2. Open the lid (b).
3. Take out the tree assembly thanks to its handle (i) and place it on the drip tray (c).
4. Fill the measuring cup (l) with fresh and clean water. Pour the water into the heater tank (m).
5. Place the tree assembly into the appliance. Place the bottles upside-down on the steam branches (e) so that the steam can enter
the bottles directly.
6. Arrange the nipples and rings onto the small double branches on the base of the appliances (f). Put the caps on the little branches
at the top of the tree assembly (g).
Please find on page 2 how to place the different kinds of bottles.
7. Place the lid onto the appliance.
8. Plug the appliance into the mains and press the "On" button (j) to start the sterilization process.
9. The steam will go out through the steam branches (e), the central trunk (d) and the bottom of the appliance, ensuring a
complete sterilisation.
10. The lamp will illuminate to show that the appliance is working. It will go out automatically and an alarm will sound when the cycle
is complete.
11. Open the lid with its handle (a) and remove the bottles carefully: they will be very hot.
12. Always allow the appliance to cool between the cycles and prior to removing the bottles and accessories.
You can adapt the configuration of the tree depending of the accessories you need to sterilize (see page 4). The central trunk (d) and
all the branches are removable so that you can get the white base (h) alone to sterilize big accessories such as breast pumps.
To remove the branches, press them towards and pull them up.
Cleaning
- Never submerge the appliance in water, and don't fill it right up with water.
- Use a slightly damp cloth to clean the inside and outside.
De-scaling
Do not use any de-scaling products.
Depending on how hard the water used is and after a certain period of time, a layer of scale may build up in the tank. In order for the
sterilizer to work properly, the tank needs to be de-scaled regularly.
Proceed as follows: pour a mixture that is one-half hot water and one-half distilled white vinegar into the tank (m). Leave to act for
30 minutes then empty the tank. Then use a damp cloth to clean it.
COMPONENTS
f. Double branches for nipples and rings
g. Branches for caps
h. White base
i. Tree's handle
j. "On" button
ADJUST THE STERILIZER CONFIGURATION
MAINTENANCE
TURBO STEAM ELECTRIC STERILIZER • Instructions for use
FEATURES
• Powerful: 550 W
• Universal: for all types of baby bottles.
• Safe: automatic stop when the cycle is complete.
Complies with EN 60335-1 and EN 60335-2-15 standards.
HOW TO USE
DRAINING RACK
STERILIZER
k. Steam hole
l. Water cup
m. Heater tank
11