Publicidad
Idiomas disponibles
Idiomas disponibles
When you record TV programs, connecting
the external antenna is recommended.
> Additional information
Troubleshooting
If you run into any problem using the unit,
first check the power supply source, then use
the following table for troubleshooting. Also
see the operation manual of the VCR.
Symptom
Corrective actions
appear on the LCD.
VCR to ON.
¢ Set INPUT SELECT to
TUNER.
The picture is not
Adjust the telescopic
clear.
antenna for the best reception
or connect an external
antenna.
* If you are near a television
tower, set BOOSTER to OFF.
Double images or
Reflection from nearby
"ghosts" appear.
mountains or buildings often
causes this problem.
Adjust the telescopic antenna
for the best reception.
Dots or spot
Noises from a hair drier,
patterns appear on
automobile or motorbike can be
the picture.
:
the cause. Keep the unit away
from such noises.
The channel cannot
First pause or stop recording,
be changed during
and then change the channel.
recording.
The DISPLAY button
—_You cannot display the channel
does not operate.
during recording.
The unit does not
Connect to the VCR firmly.
operate.
|
Specifications
Channel coverage
VHF 2 - 13 channels
UHF 14 - 69 channels
7
Antenna input 75-ohm minijack for VHF/UHF
Power requirements
DC7.2V
Power consumption
14W
Operating temperature
0 °C to 40 °C (32°F to 104 °F)
Storage temperature
-20 °C to 60 °C (-4°F to 140°F)
Dimensions
Approx. 39 x 61 x 218 mm (w/h/
d) (27/8 x 2'/4x5!/s inches)
Mass
Approx. 180 g (6.7 oz)
Supplied accessory
Connecting cable (1)
Design and specifications are subject to change
without notice.
Publicidad
