Atlas Copco ETVST61-28-10 Instrucciones Del Producto página 9

ETVST61-28-10
Overhaul and preventive maintenance is recommended at regular intervals once per year or after maxi-
mum 250.000 tightening depending on which occurs sooner. More frequent overhaul may be needed if
the machine is used in heavy-duty operations. If the machine not is working properly, it should immedi-
ately be taken away for inspection.
When dismantling the tool always use the specially designed service tool 4080 0848 80, (two service
tools are required).
Lubricating guide
Brand
Molycote
CRC
Brand
Molycote
Almagard
Repair
Repair
Repair must only be carried out by qualified authorised personnel. For further information contact your lo-
cal Atlas Copco sales representative.
EN
Cable nut
Litium grease No. 3020
Angle gears
Longterm 2 plus
© Atlas Copco Industrial Technique AB - 9836 8491 00
Gears
BR2 Plus
General purpose
LE 3751
Service
9