MPM MOD-61 Manual De Instrucciones página 25

USING THE APPLIANCE
1. Before switching on the vacuum cleaner, unfold the power cord (14) to the appropriate length and
insert the plug into the mains socket. The green sign on the power cord means the optimal length.
Do not extend the cord beyond the red marking! When unwinding the cord, do not press the vac-
uum cleaner handle (2), which acts as a cord retractor button in the folded position.
2. Press the switch (3) to switch the vacuum cleaner on.
CAUTION! It is recommended to set the power regulator knob (3) to MIN before switching the
vacuum cleaner on!
3. During the operation of the appliance, select the optimal suction power with the suction power
regulator knob (3). Follow the rule that we use the lowest power for delicate surfaces (MIN), grad-
ually increasing it for carpets and floors with heavy soiling (MAX).
4. Keep the dust container level under regular control (4). The container must not be filled over the
horizontal line MAX located on the container. The overfilling of the container will result in the
weakening of the suction power and the fast soiling of the filters.
CAUTION! If you conclude that the suction power of the vacuum cleaner is weaker, clean the
dust container and/or unblock the suction hose.
5. To optimally position the appliance after use, use the parking handles (18) in the horizontal position
located on the back of the vacuum cleaner next to the protective grille of the Hepa filter. Place
the catch located on the back of the floor-carpet head (19) with the connected suction hose and
telescopic tube. The second catch for parking, which facilitates the storage of the vacuum cleaner
in the vertical position is located underneath the appliance.
6. To retract the power cord, press the folded handle of the vacuum cleaner (2) with one hand and
hold the cord with the other hand to prevent sudden shuffling that could damage the cord.
DESCRIPTION OF ACCESSORIES
FLOOR AND CARPET BRUSH
It is designed for the cleaning of large and flat surfaces. It is equipped with wheels which
facilitate movement in hard-to-reach areas and a flexible joint which connects it to the
suction hose, allowing it to be guided at different angles. When the button on the top of
the attachment is pressed ( switching it to the brush mode), a row of stiff bristles will ap-
pear on the underside of the attachment, allowing hard floors to be cleaned.
PARQUET BRUSH
It is designed for vacuuming scratch-prone surfaces such as wooden floors, parquet floors
and floor panels.
SMALL TURBO BRUSH
It is designed for effective cleaning of surfaces such as sofas, armchairs, as well as car
upholstery or carpets.
CREVICE ATTACHMENT
It is used for cleaning hard-to-reach areas such as corners of rooms, next to and under
furniture and in folds and crevices. It is also perfect for cleaning computer keyboards,
drawers, radiators or window frames.
EN
25