Temper KOBAN K KMPC-01-50A Manual página 51

3.2 Panel introduction
1
1―― Power output parameter display area to display the current output voltage, current, frequency, power, power factor and
current power status in real time
2―― Frequency setting area, prompt the current can set the frequency range, set the frequency value
3―― Voltage setting area, select and display the current voltage gear, prompt the current voltage range and set the voltage
value
4――Control area, to start and stop controlling the power supply
4 Installation
 The variable frequency conversion power supply shall be connected to the mains socket with protective grounding to ensure
the safety of the operators;
 Ensure that the input voltage meets the requirements of the input technical index;
 There should be 200mm gap between the sides and rear of the power supply to ensure good ventilation;
 In thunderstorm weather, should stop the operation of power sauce and it is better to unplug the power cord;
 Avoid placing places in direct sunlight, rain or humidity;
 Stay away from the fire source and high temperature in case the machine temperature is too high.
 Installation diagram, you must connect correctly before use!
Program-controlled Power Souce User Manual
5
2
3
4