Publicidad
Idiomas disponibles
Idiomas disponibles
FlashLight
Holder install manual when wire inside the wall
Figure 23
1) Open the packaging and take
out the accessories for installation.
Figure 26
4) Take out the decorative ring as
the direction showed.
85265
2) As it shown in the pic, drill two
holes with 6mm diameter and
35mm deepness according to the
spacing between the two
holes on the holder which is 55
mm, put the expansion tube into it.
5) Remove the yellow cover as the
direction showed.
Figure 24
3) Fix the holder on the wall by a
self-tapping screw of Φ3.8*30mm.
xed
Figure 27
6) Press the base´s holes into the
lamp.
Opening your life
Figure 25
Figure 28
6
Publicidad
