Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble or install the
product.
WARNING
· Safety discard all packing material.
· Keep plastic bags and small parts away from children.
· Safety glasses should be worn at all times.
· Do not load this cabinet with more than 50 lbs.
· Do not load each shelf with more than 25 lbs.
CAUTION
· The included plastic wall anchors are intended for use with solid wall applications
only (tile or concrete).
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents list. If any part is missing or damaged, do not
attempt to assemble the product.
Estimated Assembly Time: 30 minutes (with recommended two-person installation).
Tools Required for Assembly (not included): Measuring tape, Level, Phillips screwdriver, Stud
finder.
This product can be installed in one mounting option: SURFACE MOUNT (continue to page 5).
MOUNTING OPTIONS
STUD WALL: Secure the unit to wall using screws (AA) and a washer
(not included) at marked stud locations.
DRYWALL: Drill holes at marked locations and secure the unit
to wall using screws (AA) with toggle bolts or drywall anchors (not included).
CONCRETE WALL: Drill 5/16-inch holes at marked locations, then
insert wall anchors (BB) into holes. Secure the unit to wall using screws(AA).
Lowes.com/allenandroth
4
SURFACE-MOUNT INSTALLATION INSTRUCTIONS
1. Decide the cabinet mounting position, and mark screw
locations with a pencil (not included) a minimum of 3
inches above your existing faucet/vanity. Use screws
(AA) and hardware best suited for wall type to secure
the unit to the wall. Refer to MOUNTING OPTIONS on
page 4.
2. With the assistance of another person, install the
unit aligning the screw holes with the Achors (BB) fixed.
Then using the screws (A) inserted into washers (EE)
and tighten the screws until they fix the unit on the wall,
DO NOT OVER TIGHTEN. Install the snap caps(DD)
on the screws.
Hardware Used
AA
Screws
DD
Snap Caps
EE
Washers
1
Mark the screw
locations.
2
x 4
x 4
EE
DD AA
x 4
Lowes.com/allenandroth
5
Publicidad
