eufy Security Solo Smart Lock D20 Manual Del Usuario página 9

Prepare Door for Installation
1. Make sure that the following criteria are met so that the Solo Smart Lock D20 can be
installed properly:
①
Check the door status. Make sure the doorframe is aligned with the door.
②
There are no obstructions stuck in the doorframe.
③
Leave enough space for the deadbolt to extend into the doorframe when the
door is locked.
2. Check your door / frame dimensions to make sure that they fit the following
measurements:
• The cross bore diameter (2 '' / 54 mm or 1½'' / 38 mm)
• Backset (2 '' / 60 mm or 2¾'' / 70 mm)
• Diameter of the door hole (1'' / 25 mm)
• Door thickness (1 '' / 35 mm - 2 '' / 55 mm)
06 English
Cross bore
diameter
2 ⅛" or 54mm
or
Cross bore
diameter
1 ½" or 38 mm
Door hole
diameter
1" or 25 mm
Backset
2⅜" / 60 mm or
2¾" / 70 mm
Door thickness
1⅜" / 35 mm -
2 ⅛" / 55 mm