Publicidad
Idiomas disponibles
Idiomas disponibles
•
Assemble in the reverse order of removal, taking care that the ends of
the blades are in line with the worktop when set to the 12 o'clock position
- use the straight edge. Tighten the blade bolts carefully, not too tightly.
3.4.2 Replacing the drive belt
Remove the 3 screws securing the front cover
•
•
Remove the old belt
Pass the new belt first over the small pulley and the other end partly
•
through the large pulley
Manually rotate the large pulley clockwise until the remainder of the
•
drive belt is fully on the pulley
DISPOSAL OF WASTE APPLIANCES
At the end of its useful life, this product should not be disposed of with normal
household waste but should be taken to a collection point for the recycling of
electrical and electronic equipment. This is indicated by the symbol on the
product, operating instructions, or packaging. The materials used in this appliance
are recyclable according to their marking. By reusing, recycling, or applying other
forms of use of waste machines, you make a significant contribution to the
protection of our environment.
Your local administration will provide you with information about the appropriate
disposal point for used appliances.
3.4.2 Troubleshooting
Problem
The machine does
not start
EN
Possible cause
Blown fuse
Action
Replace the fuse with a
good one
Publicidad
