Publicidad
Idiomas disponibles
Idiomas disponibles
The machine only
works when the
green ON/OFF
switch button is
pressed and held in
this position
The engine of the
machine cuts out,
the machine
operates
intermittently
The motor runs, but
the blade shaft does
not rotate
The motor slows
down while the
workpiece is being
processed
Strong vibrations
EN
Interrupted connection with
the ON/OFF switch
Defective ON/OFF switch
The blade guard is not
attached
Defective power switch
Worn motor carbon brushes
The drive belt is damaged,
loose or has come off the
pulleys
The processing depth is too
big
Clogged suction system
Blunt blades
Blade out of balance
Check the connection of the
ON/OFF switch
Replace the defective
switch
Attach the plastic cover or
correct it
Replace the defective
switch
Replace motor carbon
brushes
Reattach the belt or replace
it with a new one
Reduce the cutting depth as
recommended
Remove any debris and
make sure the suction
system is working properly
Sharpen or replace the
blades (always in pairs)
Correct the height of the
blades in relation to the
worktop and fix them
evenly
Publicidad
