Publicidad
Idiomas disponibles
Idiomas disponibles
500043
⚫ Using soap suds and a sponge, finish by washing the surface.
⚫ Rinse thoroughly with water and allow the surface to dry.
Cooking grid & Warming Rack
⚫ Use mild soap suds.
⚫ Mild abrasive agents can be used for stubborn stains.
⚫ Following this, rinse thoroughly with water.
Clean the burner
⚫ Turn the gas OFF at the control knob and disconnect the cylinder.
⚫ Remove cooling grate.
⚫ Clean the burner with a soft brush or blow clean with compressed air and wipe with a cloth.
⚫ Clean any clogged ports with a pipe cleaner or stiff wire (such as an opened paper clip).
⚫ Inspect burner for any damage (cracks or holes). If damage is found, replace with a new burner.
Reinstall the burner, check to ensure that the Gas valve orifices are correctly positioned and
secured inside the burner inlet (venturi).
Store the gas barbecue
⚫ Before storage, please ensure the barbecue is clean and dry.
⚫ Store the barbecue in a dust-free, dry room.
⚫ Always use a cover to protect the barbecue to avoid rust.
TROUBLE SHOOTING
Problem
Burners will not light
using the ignition
system
Low flame
or flashback
(fire in burner tube-a
hissing or roaring noise
may be heard)
Difficultly turning control
knob
SERVICING
Your gas barbecue should be serviced annually by a competent registered person
Possible Cause
LP gas cylinder is empty
Faulty regulator.
Obstructions in the burner
Obstructions in gas jet and hose
Electrode wire loose or disconnected
on electrode or ignition unit
Electrode or wire is damaged
Faulty push button igniter
LP gas cylinder too small
Obstructions in burner
Obstructions in gas jets or gas hose
Windy conditions
Control Knob Broken
Gas valve jammed
Solution
Replace with full cylinder
Have regulator checked or
replace
Clean burner
Clean jets and gas hose
Reconnect wire
Change electrode and wire
Change igniter
Use required cylinder
Clean burner
Clean jets and gas hose
Use BBQ in a more
sheltered position
Replace control knob
Replace gas valve
Publicidad
