Publicidad
Idiomas disponibles
Idiomas disponibles
1
CHARGING THE VACUUM
WARNING:
TURNED OFF.
NOTE:
Before using the vacuum for the first time, charge vacuum to full capacity. Suggested to use a
5V/2A or 5V/3A power adapter (not included) with the type-C charging cord (included) to charge the unit.
The charging time is 3.5-4 hours.
1. Connect the type-C charging cord to an appropriate adapter and plug into a wall outlet.
2. Insert the charging cord into the charging port on bottom of the vacuum (Fig. 1).
3. The battery indicator on the vacuum will pulse blue while charging. When the battery is fully
charged, the battery indicator light will glow a constant blue and will turn off after 1 hour.
NOTE:
If the battery indicator does not pulse blue when charging, check to ensure that the charging
cord is fully inserted into the charging port on the vacuum, and is properly plugged into the adapter and
the wall outlet.
4. Remove the charging cord from the vacuum. Remove the charging adapter from the outlet.
5. When the battery needs to be re-charged, the battery indicator light will begin to flash blue to
indicate it is time to charge the vacuum. The blue flashing will continue until the vacuum is charged
or is completely out of battery power.
USING THE VACUUM
1. Make sure that the vacuum is fully charged before use.
2. Your vacuum comes ready for dry vacuum cleaning. If the filter is not installed, refer to page 9-10
for installation instructions.
3. To power on the vacuum, press the On/Off button (Fig. 2). Once turned on, the battery indicator
lights up blue.
4. To power off the vacuum, press the On/Off button again. The battery indicator goes out.
OPERATION
2
BEFORE CHARGING, MAKE SURE THE VACUUM IS
7
Publicidad
