Publicidad
Idiomas disponibles
Idiomas disponibles
7.3
Assembly and use of the shoulder strap (Fig. C)
Assembly:
▪
Use your thumb or fingers to squeezing the safety lock piece (A), put the hook to the
hanging part (B) of the tool.
▪
Move slide buckle (C) to adjust the length of the shoulder strap. Adjust the length of the
shoulder strap to obtain a comfortable working position.
▪
Put the shoulder strap over your right shoulder. Carry the tool engine at the right side of
your body.
Disassembly:
▪
Remove the safety lock piece in the opposite way.
▪
Take off the shoulder strap.
Never attach the strap diagonally across your shoulder and your breast, but
rather place it on one of your shoulders. In this way you can remove the tool
quickly from your body in case of danger.
7.4
Assembly of the portable hedge trimmer (Fig. D)
▪
Open the quick release button (5) of the housing.
▪
Put the rear handle (18) into the opening of the housing.
▪
Lock the quick release.
7.5
Starting and stopping telescopic hedge trimmer (Fig. E)
▪
To start the tool: press the safety button (11) and then press the trigger (12). Release the
safety button once the motor has started.
▪
To stop the trimmer: Release the trigger.
7.6
Starting and stopping portable hedge trimmer (Fig. F)
▪
To start: Grasp the front handle with one hand, and press the front handle switch (17).
Then grasp the rear handle with the other hand, and press the safety lock (11) first, then
operate the rear handle switch (12). Release the safety button once the motor has started.
▪
To stop: Release one of the two switches (17, 12).
▪
The blade brake causes the blades to stop within 1.0 seconds.
7.7
Adjustment of the telescopic tube (Fig. G)
Disconnect your gardening tool from the power supply.
▪
Loosen the locking knob for length adjustment (7) completely.
▪
Push the telescopic tube to the desired length .
▪
Finally tighten the locking knob firmly.
Copyright © 2024 VARO
POWXG2043
P a g e
| 6
EN
www.varo.com
Publicidad
