Hilti DX 6 Manual De Instrucciones Original página 36

Cartridges
Ordering designation
DX 6 cartridge
DX 6 cartridge
3.8 Minimum distances and edge distances
You must always observe certain minimum distances and spacing when driving fasteners. They can differ,
depending on the product.
Comply with the instructions for use in the operating instructions of the fastener used, in the Hilti
Direct Fastening Technology Manual or the corresponding local Hilti 'Technical Guide to Fastening
Technology'.
Fastening to concrete or steel
Description
minimum distance from the edge of the base material to the
fastener
minimum center-to-center distance between fasteners
minimum base-material thickness
3.9 Information about the field of applications
See the Hilti product page for more information about the areas of application.
4 Technical data
Weight
Length (fastening tool)
Length (fastener)
Recommended maximum fastening
rate
Required contact pressure
Compression stroke
Ambient temperature (storage and
use)
Weight
Length (fastening tool)
Length (fastener)
Recommended maximum fastening
rate
Required contact pressure
Compression stroke
Ambient temperature (storage and
use)
28 English
Color
titanium-gray
black
Concrete
≥ 70 mm
≥ 80 mm
≥ 100 mm
DX 6-F8 DX 6-F10
3.37 kg 3.38 kg
475 mm 475 mm
13 mm ... 72 mm 13 mm ... 72 mm
700 fastener driving 700 fastener driving
operations/h operations/h
174 N ... 200 N 174 N ... 200 N
19 mm 19 mm
−15 ℃ ... 50 ℃ −15 ℃ ... 50 ℃
DX 6 IE-L
3.43 kg
547 mm
20 mm ... 140 mm
700 fastener driving opera-
tions/h
174 N ... 200 N
19 mm
−15 ℃ ... 50 ℃
2232121
Power level
strong
extra-strong
Steel
≥ 15 mm
≥ 20 mm
Follow the instruc-
tions in the operat-
ing instructions of
the fastener!
DX 6-MX
3.63 kg
485 mm
13 mm ... 72 mm
700 fastener driving
operations/h
174 N ... 200 N
19 mm
−15 ℃ ... 50 ℃
DX 6 IE-XL
3.48 kg
607 mm
20 mm ... 200 mm
700 fastener driving opera-
tions/h
174 N ... 200 N
19 mm
−15 ℃ ... 50 ℃
*2232121*