Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
1a. Attach drawer left (T), drawer right (U) and drawer
stretcher (X) to drawer back (V) with M4 x 35 mm
screws (BB).
1b. Install cam tapping bolts (KK) into drawer front (S).
1c. Attach handle (QQ) onto drawer front (S), securing with
5/32 in. x 25 mm bolt (RR). Set aside.
Hardware Used
BB
M4 x 35 mm Screw
KK
Cam Tapping Bolt
QQ
Handle
RR
5/32 in. x 25 mm Bolt
2. Insert drawer bottom (W) into drawer left (T), drawer
right (U) and drawer back (V).
3a. Attach drawer front (S) to drawer left (T), drawer
right (U) using small cam locks (SS).
3b. Plug Plastic Covers (PP) to cover the small cam
locks for nice looking.
Hardware Used
SS
Small Cam Lock
Plastic Cover
PP
1
V
U
X
x 12
RR
x 12
x 2
x 2
x 4
QQ
2
W
U
x 2
V
3
PP
x 8
x 8
U
x 2
7
ASSEMBLY INSTRUCTIONS
4a. Using small cam locks (SS) to fix drawer stretcher (X)
BB
with drawer front (S).
4b. Repeat previous steps to attach another drawer.
T
Hardware Used
SS
Small Cam Lock
KK
S
5. Install cam tapping bolts (KK) and wood dowels (LL)
into pre-drilled holes on bottom back stretcher (P) &
upper backplane (M) and make sure they are com-
pletely seated, attach bottom back stretcher (P) & upper
backplane (M) to lower backplane (N) by cam locks (JJ)
as shown in figure.
Hardware Used
JJ
Cam Lock
T
KK
Cam Tapping Bolt
LL
Wood Dowel
6. Install cam tapping bolts (KK) and wood dowels (LL)
into pre-drilled holes on left side panel (K) & right
side panel (L) and make sure they are completely
seated, then attach left side panel (K) & right side
S
panel (L) to assembled bottom back stretcher (P)
& upper backplane (M) & lower backplane (N) and
middle front stretcher(O), bottom front stretcher (Q),
securing with cam locks (JJ) as shown in figure.
Hardware Used
JJ
Cam Lock
SS
T
KK
Cam Tapping Bolt
LL
Wood Dowel
4
S
x 4
X
x 2
5
M
x 2
N
x 2
x 5
P
6
O
Q
M
LL
x 14
K
x 14
N
P
KK
x 6
8
SS
LL
JJ
KK
L
JJ
Publicidad
