Publicidad
Idiomas disponibles
Idiomas disponibles
When using air-powered accessories, always wear safety clothes.
Keep the work area free and always maintain a stable position.
Do not allow inexpert persons to use tools without suitable supervision. Keep children and animals at a distance from the
work area; improper use of compressed air may cause serious injuries.
TECHNICAL DATA Max. pressure: 8 bar
INSTRUCTIONS FOR USE Fill the bowl, screw it to the body of the gun and then connect the air hose to the inlet fitting. Press
lever to spray the liquid. Adjust the size of the jet required using the ring-nut and then secure this with the rear ring-nut.
WARNINGS Always hold the gun horizontal during use in order to improve suction of the liquid in the bowl. Do not spray
harmful substances without wearing a mask and safety goggles.
TECHNICAL DATA Max. pressure: 8 bar
INSTRUCTIONS FOR USE Connect the air hose to the inlet fitting on the gun. To inflate the tire and check pressure, insert
the fitting in the valve of the tire holding down the lever on this, following insertion, release the lever. With the gauge facing
you, read the pressure; for inflation, press the lever fully for a few seconds and then release it; repeat the operation until
you have obtained the pressure required as shown by the needle on the dial of the gauge. For deflation, release the lever
and press the button with your thumb until all the air has been expelled.
WARNINGS Never exceed the inflation pressure recommended in the instructions for use of the object to be inflated. Protect
the gauge against impacts. In the case of impacts, check calibration.
TECHNICAL DATA Max. pressure: 8 bar
INSTRUCTIONS FOR USE Connect the air hose to the inlet fitting on the gun. Direct the nozzle towards the area or object to
be blown and press the lever. The flow of air can be adjusted by regulating pressure on the lever.
Publicidad
