Switching The Device On And Off; Switching On The Device; Switching Off The Device; Switching On The Display (Standby) - Seca 874 + Instrucciones De Uso

6.1

Switching the device on and off

Switching on the device

Switching off the device

Switching on the display (standby)

Rotating the display

40 • seca 874 +
✓
The scale has no load.
► Set the ON/OFF switch to "ON" position.
ð The scale is operational when
ð If the scale is operated with a power supply unit, the
the display.
NOTE
The display switches off automatically after a short time if there is no
load on the scale (when operated with batteries only).
► Set the ON/OFF switch to "OFF" position.
NOTE
Switch off the device before transporting it so that the
accidentally pressed during transport, so wasting power.
► Briefly press the
TARE
ð The scale is operational when
NOTE
The display switches off automatically after a short time if there is no
load on the scale (when operated with batteries only).
✓
Device is switched on
1. Press and hold the
TARE
ð The
SECA
2. Briefly press the
TARE
ð The display rotates.
ð After 5 seconds of inactivity,
position.
NOTE
If you briefly press the key again during these 5 seconds, the display
will rotate back.
appears in the display.
0.0
key.
TARE
appears in the display.
0.0
TARE key (5 seconds).
display flashes.
key.
TARE
appears and the display remains in this
0.0
symbol appears in
TARE key is not