Aiwa ZENKAISUI EVO 4 PET CARE Manual De Instrucciones página 12

METHOD 1:
The product can be loaded on the storage wall mount. The digital display will show
the charging process, and when it reaches 100%, the battery will be fully charged.
(IMAGE 3)
METHOD 2:
The battery pack can be removed and charged separately. The battery indicator light
will flash green. When the battery is fully charged, the green light will stay on.
4)
WALL MOUNT
Place the charging stand against the wall, aligning the two holes in the set screws
with the marks you made on the wall. Secure the bracket firmly to the wall with
screws. Make sure the bracket is properly level and tight before fully tightening the
screws. Once the holder is attached, place the vacuum cleaner on it, making sure
that it is securely hung and stable. (IMAGE 5)
Warning!
1. Before drilling into the wall, make sure there are no gas pipes, water pipes,
electrical wires, or other wires behind the area where you are going to mount the
bracket.
2. To prevent the bracket from coming off, it is essential to ensure that it is firmly
installed. Check that the screws are fully tightened and that the bracket is stable
before hanging the vacuum.
HOW TO USE
Before using the device, make sure to take the following steps:
•
Charging the Battery: Confirm that the battery is fully charged. This will help
provide optimal performance and prevent interruptions during use.
• Securing the Battery: Make sure the battery is securely fixed in place. This
prevents loose connections that can affect the operation of the device. (IMAGE
2)
•
Clean and Dry the Dust Container and Filters: Make sure the dust container
and filters are completely clean and dry. This is crucial to maintaining effective
suction and optimal overall performance. (IMAGEN5)
• Secure the Dust Container and Filters in Place: Confirm that the dust
container and filters are securely secured in place. Proper installation helps
prevent leaks and ensures that the vacuum cleaner operates efficiently.
START WORK
To start work, simply press the power button located on the device(IMAGEN6). Once
you press the button, the machine will turn on and start working, effectively
vacuuming up dust and dirt. When you want to stop the machine from working, you
just need to press the same power button again. This action will shut down the
machine, stopping the suction and allowing you to perform any other necessary
tasks. It's important to remember to always turn off the machine after use to
conserve battery power and extend the life of the device.
SELECTING THE CLEANING MODE (IMGAEN 7)
1. To start in "standard" mode, simply turn on the vacuum. This will be the
default mode when you turn on the device.
ENGLISH
(IMAGE