Publicidad
Idiomas disponibles
Idiomas disponibles
Contents of Carton
1 - Air Compressor
1 - Parts bag containing:
1 - Operator's Manual
1 - Parts Manual
4 - 5/8" Washers
Tools Required for Assembly
1 - 9/16" socket or open end wrench
1 - electric drill
Unpacking
1.
Remove all packaging.
or support one side of the outfit
when removing the pallet because
the air compressor will have a
tendency to tip.
2.
Remove and discard the (4)
screws and washers holding the
compressor to the pallet.
3.
With the help of another person
carefully remove air compressor
from pallet and place on a level
surface.
To Add Oil To Pump
A small amount of oil may be
present in the pump upon receipt
of the air compressor. This is due
to plant testing and does not mean
the pump contains oil. Do not
attempt to operate this air
compressor without first adding oil
to the crankcase. Serious damage
can result from even limited
operation unless filled with oil and
broken in correctly. Make sure to
closely follow initial start-up
procedures.
D26064
ASSEMBLY
It may be
necessary to brace
Compressors are
shipped without oil.
10W 30, should not be used in an air
compressor. They leave carbon
deposits on critical components,
thus reducing performance and
compressor life. Use air compressor
oil only.
1.
Remove the oil drain plug (B) and
washer (C).
C
2.
Obtain the drain plug extension
(D), from the parts bag.
3.
Apply thread sealant tape to the
threads of the drain plug extension
(D).
4.
Assemble the washer (C), drain
plug extension (D), and drain plug
(B) as shown in Figure.
5.
Tighten securely.
6.
Remove the oil fill plug (A).
7.
Fill the crankcase with the
recommended oil. NOTE: Use an
air compressor oil such as SAE-30
(API CG/CD heavy duty motor oil).
Under extreme winter conditions
use SAE-20 weightoil.
8.
Replace the oil fill plug (A) and
tighten securely.
10-ENG
Multi-Viscosity
motor oils, like
A
B
C
D
B
Publicidad
