Bresser MeteoTemp TBH Manual De Instrucciones página 24

11. Channel select
3. In normal mode, press the
select Channel 1, Channel 2 , Channel 3 or
cycle display.
4. Hold the button for approx. 3 seconds to
reset values and search for an RF signal.
NOTICE! Always make sure the channel chosen
on the display unit matches the channel option
chosen on the outdoor sensor.
12. Backlight ( Always power by
adapter)
When power on the adapter, press the
button to choose the backlight level. It
has 4 levels backlight.
In normal mode:
1. Press and hold button for approx. 3 seconds
24
2. Digits to be set are flashing.
3. Press
button to
4. Press
5. Settings order: night mode on/off > Hour
6. Finally press the MODE button to save the
The backlight level for night mode will be Level
2, When turn on the night mode, the AUTO DIM
symbol will display.
13. Temperature Alert
Temperature alert setting
1. In normal mode, Press the
to enter the night mode.
or button to change the value.
button to confirm and continue
to the next setting.
for night mode start time > Minute for night
mode start time > Hour for night mode end
time > Minute for night mode end time
settings and exit the setting mode.
button to