Costway SP37726 Instrucciones De Montaje página 8

FIG.11
17. Connect the Sensor Wire from Switch Sensor (#15) to the Electronic
Scorer (#14) as shown in FIG.11.Connect the Control Wire to the
Electronic Scorer (#14) as shown in FIG.11 and 11A.
Electronic Scorer
FIG.11
FIG.12
18. To fold game up when not in use, remove Lock Pins (#A4), fold the
front of the basketball game up and re-insert Lock Pins (#A4) as shown in
FIG.12. Note: The Lock Pins need to be removed before folding closed or
open.
FIG.12
A4
Lock Pin
16
14
FIG.11A
Sensor Wire
ON/OFF
IMPORTANT!
Make sure to use the
Lock Pin (#A4)when folded.
ELECTRONIC SCORER OPERATION
Installing Batteries:
Using a screwdriver, unscrew lid and open the battery box. Insert 3
"AA" batteries ( not included)in the order of polarity as shown on the
inside cover. Close the cover and tighten screw.
Turn the power ON using the ON/OFF switch.
Reminders:
. Batteries must be installed according to the correct polarization (+ and
-) requirement.
. Please clean the battery contacts, and also those of the device, prior
to battery installation.
. If the game will not be used for a long period of time,we recommend
that the batteries should be removed.
WARNING:
1) Requires 3 "AA" batteries (not included).
2) Do not mix old and new batteries.
3) Do not mix alkaline, standard (carbon zinc), or
rechargeable (nickel- cadmium) batteries.
How to play:
Turn the power ON using the ON/OFF switch.The LED scorer shows
playing time 60 seconds.
The first player shoot in 60 seconds to score point.The second player
starts in new 60 seconds.
Player with more points scored wins (LED will flash on player with higher
scores).
CONTROL
WIRE/
CONTROL
CABLE
ON/OFF
17