Publicidad
Idiomas disponibles
Idiomas disponibles
•
Do not move the control levers to the fully
forward position or the fully reverse position
during the initial operation.
•
Learn how to operate the movement of the
product on a hard surface, for example concrete
or asphalt, before you operate the product on a
lawn for the first time.
To do before you operate the
product
WARNING:
product, you must read and understand
the safety chapter.
WARNING:
product, you must make sure that there
are no stones or other objects in the
work area that can be thrown by the
rotating blades.
•
Do the daily maintenance. Refer to
schedule on page 15 .
•
Make sure that there is sufficient fuel in the fuel
tank.
•
Set the cutting height. Refer to
height on page 12 .
To fill fuel
WARNING:
flammable. Be careful and refuel
outdoors, refer to
WARNING:
exhaust system become very hot during
operation. Risk of burn injury. Let the
engine and the exhaust system become
cool before you fill fuel in the product.
WARNING:
tank as a support area.
CAUTION:
result in engine damage.
The engine runs on gasoline with a minimum octane
rating of 91 RON (87 AKI), not mixed with oil. We
recommend biodegradable alkylate gasoline.
•
Do a check of the fuel level before each use and
refuel if it is necessary.
•
Do not fill the fuel tank fully. Fill to the bottom of
the fuel tank neck.
2374 - 005 - 16.07.2024
Before you operate the
Before you operate the
Maintenance
To set the cutting
Gasoline is very
Fuel safety on page 9 .
The engine and the
Do not use the fuel
Incorrect type of fuel can
To set the product in stand on or
walk behind position
•
Pull the latch to the right and fold down the stand
on platform to use the stand on option.
WARNING:
distance when the stand on platform
folds down.
•
Fold up the stand on platform to use the walk
behind option.
To adjust the adjustable bar
1. Turn the adjustment levers of the adjustable bar
(A) counterclockwise, until the adjustable bar can
rotate freely.
B
A
2. Put the adjustable bar (B) into correct work
position.
3. Turn the adjustment levers of the adjustable bar
(A) clockwise unti they are fully tightened.
Keep a safe
A
11
Publicidad
