Norelco Advantage 6705X Manual Del Usuario página 13

4 Shake off excess water and close Razor Head Assembly.
B Once A Week: Charging Stand
1 Unplug the charging stand.
2 Clean the charging stand with a moist cloth.
B Every Two Months: Razor Heads
IMPORTANT: Do Not interchange the cutters and
combs.They are a matched set and if interchanged may
adversely affect shaving performance until cutters reseat
themselves.Therefore, remove, clean and replace each
set individually.
1 Switch razor OFF.
2 Press the Razor Head Release Button located under
razor heads on front side of Razor.
3 Remove the Razor Head Assembly and clean the
razor heads and hair chamber by running under hot
water. Be sure water is not too hot so as to cause
burns or scalding.
4 While holding Razor Head Assembly in one hand, press
center wheel down while turning counterclockwise to
release and lift out frame. Set frame aside.
ENGLISH 13.