Brinkmann 810-5504-S Manual Del Propietário página 6

INS_810-5504-S.qxd 11/15/10
Smoker Box
Handle
Smoker Box
Door
5:34 PM Page 5
Washer
Spring
Door Retaining
Bracket
Choose a good, cleared assembly area and get a friend
to help you put your smoker together. Carefully remove
all components from Smoker Box. Lay cardboard down
to protect smoker finish and assembly area.
Step 1
Slide washers and spring onto latch end of handle
as illustrated. Insert handle through hole in door
and slide door retaining bracket over handle.
Secure door retaining bracket using two
M6 X 12 mm Phillips head bolts. Repeat steps
for other door.
NOTE:
Door handles must be pushed in while turning
handles to "CLOSE" position.
Step 2
Attach side handles to smoker using four
M6 X 12 mm Phillips head bolts, star washers and
M6 nuts.
WARNING: Use caution when lifting or moving
smoker to prevent strains and back
injuries. Moving smoker may require the
help of an additional person.
NOTE:
With the help of a friend, turn the smoker box
upside down. Make sure door is securely
latched to avoid injury.
Step 3
Attach legs to bottom of smoker using twelve
M6 X 12 mm Phillips head bolts.
4