Publicidad
Idiomas disponibles
Idiomas disponibles
en-us_main.book.book Page 17 Tuesday, February 13, 2024 3:18 PM
5
Grip both sides of the drawer and pull it up to
remove it from the rails.
6
Hold both rails and push them in
simultaneously.
Assembling the Freezer Drawer
1
Pull out both rails simultaneously, until they
are fully extended.
2
Grasp the drawer on each side and hook the
drawer supports into the rail tabs located on
both sides.
3
Lower the door into its final position and
insert the screws in the rails on both sides.
4
Insert the drawer into the frame, and push
the drawer back until it clicks into place.
5
Replace the ice bin in the drawer. Insert the
Durabase basket in the rail assembly.
Assembling the Right Refrigerator
Door
CAUTION
• Install the right-side door first.
NOTE
• The number of wire harnesses may vary
depending on the model.
• Ground wire is only present on some models.
1
Make sure that the plastic sleeve is inserted in
the bottom of the door. Lower the door onto
the middle hinge pin as shown in the figure.
INSTALLATION
17
Publicidad
